This is an MCC panel of dimensions(1400HX1000W). It is designed to operate upto 08 induction motors at same time. It contains DOL,Star Delta starters & VFD to operate low and high tension motors respectively. We are using MPCB of required ratings to solve the issue of overload of motors. Its S7-200 CPU&10inches HMI display control panel allow easy monitoring and controlling of every single motor in your production plant. Voltage protection & voltage monitoring relays are used to prevent from voltage/grid failure. Required fuses and MCB are used to prevent any kind of short-circuit. For remote supervision and controling, this is a SCADA supported MCC panel, put the process of your plant on your desk. The quality of this panel complies with international parameters and offer total customer satisfaction.
| Phase | Three Phase |
|---|---|
| Frequency | 50-60Hz |
| ConstructionType | Modular & Fixed Type |
| Material | Sheet Metal |
| Rated Current | Upto 100 Amps |
| Operational Voltage | 415-440V AC |
| Rated Insulation | 1000 V |
| Rated Service Voltage | 690V AC |
| Short Time Current | 36 KA for 1 sec., 36KA Peak |
| Ambient Temperature | 45 ℃ |
| Degree of Protection | IP42, 54, 55, 65 as per Custom Requirement |
|---|---|
| Brand | Siemens |
| Encloser Type | Standard Rittal make |
| Control Type | Both (Auto & Manual) |
| Bus Bar | Aluminium or Copper |
| Ref. Standard | IEC60439-1&2, IS:8623 |
| Feeder Configuration | Extendable Type |
| Communication | ETHERNET&RS485(MODBUS protocol to operate drive) |
| Type Tested for | Short Time Current withstand Temperature Rise Degree of Protection |
Automatic and Manual Both
Our Panel has a Digital Control System that Helps You More.
Upto 08 Motors Simultaneously.
For Long Life of Motors.
For Automatic Operation and Smart Controling.
For Easy and Local Controling of Your Plant.
For Remote Supervision and Controlling Access.
For Run Motor at Required RPM.
We can Customize the Panel by Required Operational Voltage.
We can Customize the Panel by Required Ampere Capacity.
Automatic & Manual, As Per Customer Requirement and Application.
As Per Customer Requirement and Application.
As Per Customer Requirement and Application.
(2,3,4 Phase) As Per Customer Requirement and Application.
(MS,SS) or As Per Customer Requirement and Application.
We can Customize the Panel According to Your Application.
Ballon Panel
Bio Gas Panel
Compressor Panel
Control Panel
Dryer Panel
Killen Ceramic Panel
Nitrogen Panel
O2 Panel
Power Panel
Scada Panel
Solar Panel
SOV Panel
Change Over Panel
PCC Panel
PLC Control Panel